The guys at Jasper Motowerks built this 997 Turbo that debuted in the Garrett booth at SEMA. It features our Agency Power parts from the VR900 turbo kit minus the GT3076 turbos which they have replaced them with a set of the new Garrett GTX turbos (specs are similar). The kit features custom Softronic Tuning, Agency Power intercoolers, ypipe, intake pipes, headers for external wastegates, and used with 80lb injectors and a Greddy boost controller. Hope to have numbers soon!

This customer sent us these photos of his weekend track car which is a Porsche 997 Carrera.  Equipped with the Agency Power bolt in roll bar, this simple piece of equipment is a great way to add safety and functionality to all the Porsche 996 and 997 vehicles.  Check out more info on the Porsche Roll Bar Here.

We recently ran across these amazing customer photos of the new Agency Power Carbon Fiber Porsche GT2 Style Wing:

One of our Agency Power Dealer’s, The Porsche Shop, over in the UK recently had their Porsche EurocupGT 997 featured in Total 911 Magazine.  We are proud to say there are a plethora of Agency Power Parts on this beast!  Check out the excerpt’s from the article below:

“Below is the article featured in Total 911 magazine (issue number 69). Since the car being featured, Total 911 has had a round up of their favourite Porsche 911s of 2010 and our car was chosen as the best from 160 cars. Here’s what Total 911 had to say:

“Close to our favourite 911 of the… Read More

Agency Power is proud to announce it’s Torque Converter Upgrade for Porsche 996/997 Turbo!
Requires original torque converter to be shipped in to be modifed. 1-2 week turnaround time.

Retail is only $1500!

Increase stall speed by 300-500rpm

Process is similar to porting and polishing a head.
Dissassemble unit, modify internals.

1 year limited warranty

For more information, contact your account rep.

Got a chance today to get a couple photos of a customer’s Porsche 997 Turbo Cabriolet PDK, equipped with our Agency Power Carbon Fiber Intake System and Exhaust.  The car also has our optional Agency Power Ceramic Coated Exhaust Tips.  The tips can be used with or without the AP exhaust.

Here’s the Carbon Fiber Intake:

Here’s a couple photos of the Agency Power Ceramic Coated Exhaust Tips:

Stay tuned for the exhaust and muffler photos once we get the car up in the air tomorrow!

Agency Power Porsche 997TT BRV Assembly

Step 1: Small and thinner O-Ring are used to seal the BRV to the turbo. Thicker O-Ring is used to seal the BRV together.

Step 2:Use silicone grease to lubricate the O-Rings and fit them into the grooves. Place the piston inside the valve body. Place the spring inside the piston and cap. The valve body and cap are sealed with “thick” O-Ring and held together with provided screws onto the turbo.

Step 3:Using the silicone grease, place the thinner and small O-Rings into the grooves of the valve body.… Read More

Vivid Racing is holding a charity car meet for all amazing JDM, Euro, and Domestic vehicles to benefit the www.woundedwarriorproject.org. Pull out your change and donate at least $1 at the door to these brave heroes as we kick back at the Vivid Racing Headquarters in Gilbert, Arizona March 5th from 7:30pm to 10:00pm. All donations will be matched 100% by VR and donors of $20 or more will receive the all new Vivid Racing T-Shirt. Bring your good spirits and checkout gear from our sponsors:Agency Power, DC Shoes, Brembo Brakes, KSport Coilovers, HRE Wheels, and Sound Xpression. Vivid Racing’s Project… Read More

Thought we would test it out and sure enough it fits!  So now this incredible race roll bar is available for the Porsche 996 Carrera, GT3, GT2, and Turbo.  Check out the install pics of this silver roll bar in this 996 Turbo.  View more information on this roll bar here - http://www.agency-power.com/catalog/agency-power-race-roll-bar-wharness-and-diagonal-bar-porsche-997-carrera-gt3-turbo-p-48062.html

Our fabrication department got some of the VR800 horsepower kit upgrade parts done so I thought I would leak out a couple of pictures before the official release tomorrow.  Pictured below is our full 3 inch aluminum Ypipe with a mount for the Greddy EBC solenoid and OEM map sensor.  You can also see in the picture the fender intake pipes, 1 of the silicone BOV return hoses, and fittings.  Both aluminum pipes are powdercoated gloss black.  Because the Porsche VTG oil and water line fittings are proprietary, we include new braze on fittings to convert for using Garrett turbo… Read More