Agency Power has partnered with Vivid Racing, Porsche Specialists, to develop this Race Roll Bar for the Porsche 997 Models. This product is exclusively available through our dealer, Vivid Racing. Read more below from Vivid Racing.

Needing a roll bar for our Project 997 Turbo, we wanted to have something that would provide us the ultimate in protection but also be functional for those days where you needed the back seats. Unlike other roll bars we have used in the past on our Project 996 Turbo, there is no drilling required. This roll bar is a… Read More

This was an installation done by a Porsche customer on his 2007 Porsche Cayman S.  The short shifter kit fits on all Porsche 996, 997, 986, and 987 cars.  The pictures show the process on his Cayman.  Similar process for 997.  996 slight differs for removal of the center console.  Shifter assembly is the same.  You can view the product here – http://www.agency-power.com/catalog/agency-power-billet-short-shifter-porsche-boxster-996-997-p-33948.html

Pop shift pattern cap off of shifter at the point indicated.  There is an indent provided to slip sharp tool in to release cap as shown.

Some models have a set screw to remove.… Read More

One of our customers sent us these photos of the Agency Power Silicone Boost Hose Kit and F-Hose kit installed on his Porsche 996TT X50.  The customer installed these on the ground as he did not have access to the lift.  Took him about 2 hours. 

The boost hose kit is designed to keep the boost pressure consistant and will not drop like the factory rubber boost hoses that expand.  The F-Hose kit is a great maintenance part to change out when upgrading the factory diverter valves.

Check out these Porsche 996TT Products Here.

One of our dealers recently installed this Porsche 997 Exhaust system on a 2006 997 C4S.  The exhaust uses the factory tips and fits to the factory cats.  Each muffler is polished to a mirror finish and is all stainless steel and TIG welded.  Check out the 997 Exhaust Product Page Here.

Video the Exhaust Video here – http://www.youtube.com/watch?v=pF2i0LzTm9w

As you step up the power level on your 996 Turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. Street and track cars will heavily benefit from the use of our upgraded intercoolers. The factory Porsche intercooler core is great, but their end tanks are what is lacking. Agency Power has developed these complete intercooler replacements for your Porsche 996 Turbo.

The bar and plate intercooler core is designed to provide maximum cooling efficiency for turbo cars producing up to 950 horsepower. The cast end tanks are aluminum and then precision welded to the thick racing upgraded… Read More

To be dyno tested shortly is the new Agency Power Intercooler Hose Kit. This kit features larger diameter silicone tubes which go from the intake pipe to the compressor side of the turbos. The factory plastic pipes are restrictive in some areas and rob needed air flow to gain power as you get up in the larger turbos. The silicone hoses connect to the turbo via an aluminum pipe which has the fitting needed for the factory sensor. On the top of the engine, the intake pipe is a twin tube design to efficiently flow cold air to the turbos.… Read More

Agency Power has worked to produce its first article of the 996TT intercoolers that should be available for sale in 4 weeks.  These bar and plate intercoolers fit all Porsche 996TT from 01-05.  They are designed and tested to work with cars to 750whp!  The pair of intercoolers will retail for about $1500.  They work with the factory style or Agency Power silicone boost hoses.  Here are the specs on the intercooler and some sneak pics -

Dimensions:
Core Thickness:  3.5 inch
Core Volume vs. Stock:  40% larger
Performance Efficiency:  85%
Flow rate: 620 CFM / side
Leak… Read More

Agency Power has just released their all new carbon fiber cold air intake kit for the Porsche 996 Turbo.  Based off their other aluminum box, this carbon fiber unit adds a sense of style and quality to the engine bay of the Porsche.  The intake utilizes the factory air snorkel to guide air in and across a colored silicone tube to the left box which houses a K&N air filter for maximum performance.  As tested on a Mustang AWD Dyno, the cold air intake kit produced 32 wheel horsepower and 22 ft/lbs of torque in the mid RPMs.  Check out… Read More

We just added some new installation articles for the Porsche 996TT Cold Air Intake and the Mitsubishi EVO X Blow Off Valve.  Check them both out here – http://www.agency-power.com/catalog/technical-bulletins-i-9.html

Agency Power released their all new beefier shifter linkage for the Porsche cars.  This linkage fits on the 996, 997, Boxster, and Cayman.  The CNC machined aluminum linkage features a delrin insert for the shifter ball to fit into.  The factory plastic one with rubber fitting is known to break under hard shifts and long term use.  This piece gives you a more precise shift without all that sloppy play.  Check out the product here – http://www.agency-power.com/catalog/agency-power-shifter-linkage-porsche-996-997-p-15560.html