As one of the most popular upgrades for the Mitsubishi EVO X, the Agency Power top intercooler pipe is now available to make your engine bay that much better!  Agency Power now offers our 3 inch top intercooler pipe kit in Carbon Fiber.  Why carbon fiber?  Simple…  Not only is it functional, reducing heat transfer, it also dresses up the engine bay quite a bit.  What makes our carbon fiber product different and better is our 1 piece tubular design.  All our intercooler pipes are made using carbon fiber braided sleeve, which gives it extreme strength and a beautiful design.  Not only do we do these in a standard gloss carbon fiber, we also offer these in a Matte Carbon finish, blue carbon weave, and red carbon weave.  Each intercooler pipe kit includes necessary couplers and clamps for a direct installation.  The top intercooler pipe was designed to work as a replacement for the OEM piping so this will fit OEM replacement larger intercoolers.

Because the 3 inch is a larger diameter then stock, the plastic radiator shroud will need to be trimmed on the underside to clear the piping. This kit is available with a diameter of 3 inches for improved air flow on higher horsepower cars. By installing this pipe kit, you will maintain boost pressure more efficiently, pick up throttle response, and gain horsepower. As tested on a Mustang AWD Dyno with our short ram intake kit, this setup made almost 30 all wheel horsepower. All Agency Power products come with a LIMITED LIFETIME warranty.

Here is the original article link.

“You remember the EVO that was “coming soon” about a month ago? Well, it is finally here and damn do we love it! It looks a little bit different since the last time you saw it but it’s all for the better. What many of us outside of Canada may not know is that these Evo’s were never sold up there until the the X’s came out. Seeing how Carson (who owns this beast) really wanted one, he came down to the states, picked up this stock EVO, and imported it back up to Canada. It didn’t stay stock for long as you’ve probably imagined. Before you know it, he was daily-ing a proper track car that was pushing431WHP! It didn’t quite satisfy him all the way, so he spiced it up with some proper shoes and aero.

Photos By: Edwin Tan exclusively for StanceNation.com

We always like to point out how we feel that less is sometimes more, and this EVO would be a perfect example. Up front you’ll only notice a Rexpeed CF front lip, that’s all. On the side Carson added APR CF mirrors which look incredible! Out in the back a small but efficient Rexpeed CF rear spoiler was added which is a huge improvement over the big stock ones. Now that is just our personal opinion, so no need to get all worked up over it. The thing we probably like the most about this EVO is that whole rear end. JDM Evo 9 rear bumper & JDM EVO 8 tail lights really set this car off just right, you agree?

We understand that some of you may feel the 37′s are played out, but the fact is majority of the 37′s that you think you saw are reproductions. The real TE37′s and now “37SL’s” are wheels that will never be “played out” to the mass. The “stance” scene, maybe, but in general, never. With that said, Carson went with Volk TE37SL’s in 18×10.5 all around with +17 offset up front and +22 offset rear. They are wrapped in KUMHO Ecsta SPT 245/35/18 tires and the car is dropped on BC Racing BR coils. He also added a set of Agency Power Rear camber arms which put him at -3.7 front and -4 rear. Lastly, he is sporting project mu B-force F/R Brake Pads which work great, especially when used and abused at the track!”

……………..A little more about the Agency Power Rear Adjustable Control Arms:

“The ultimate suspension product for your Mitsubishi EVO is now available. For all EVO VII, VIII, IX cars, Agency Power has released these highly functional, tested, and engineered to the limits, full adjustable control arms. These control arms are designed for the ultimate EVO owner. For road racing, drag racing, auto crossers, and street drivers, these control arms give you the advantage you want.

The solid 6061 aluminum is machined to spec to fit 2 urethane bushings with steel sleeves. Each urethane bushing is the same ones we use in our motor mounts with a hardness level of 88. Improving rigidity and handling and the vehicles dynamics, These control arms will allow you to setup extra camber and toe settings in the rear. The stock adjustments only allow for minimal changes, the AP arms give you a much more aggressive setup. The full race spherical rod ends fit into a steel extension offering 2 ways of adjustability. Either side includes a jam nut for secure locking and safety. The rod ends have precision machined spacers for a secure fit into the vehicle.

The adjustable control arms weigh almost 1lb lighter then the factory. Unsprung weight is what any racer needs to reduce. The control arms are sold as a pair and fit any 2003 and up EVO vehicle. Combine this with the Agency Power rear sway bar and sway bar links and you have one seriously good handling EVO!

All Agency Power products come with a LIMITED LIFETIME warranty”

AGENCY POWER

This time it’s back from some suspension love!  In addition to the new coilovers and sway bars, we’ve added:

• Agency Power Adjustable Rear Lower Control Arms
• Agency Power Adjustable Rear Sway Bar End Links

Here are a couple Blog posts about this car and it’s other Agency Power Parts:

• http://www.agency-power.com/blog/agency-power-tuner-life/alecs-ap-powered-evo-x/
• http://www.agency-power.com/blog/agency-power-tuner-life/new-carbon-fiber-intercooler-pipe-kit-for-evo-x-owners/

For example, we have the newest version of the Agency Power Mitsubishi Lancer Evolution X Exhaust. This Exhaust System stands out among the competition for several reasons!

1) Limited Lifetime Warranty

2) Polished 3 inch piping with high quality precision welds and flanges for a perfect fit

3) Dual pipe setup to deliver efficient exhaust flow and maximum power

4) The mufflers are a straight through design and feature 4 inch titanium tips

5) The system fits with factory hangers and can be used with the factory catalytic converter or Agency Power’s optional test pipe with O2 bung

6) As tested on a Mustang all wheel drive dyno, the exhaust system made impressive gains of +14 WHP.  The mufflers were designed to provide a clean race tone with minimal cabin noise.

For more information, click here.  Check out the YouTube video clip at the bottom with dyno chart as well.

For example, we have the newest version of the Agency Power Mitsubishi Lancer Evolution X Fuel Rail. This Fuel Rail stands out among the competition for several reasons!

1) Limited Lifetime Warranty

2) Re-Configurable for future mods such as larger injectors, larger fuel pressure regulators, larger fuel lines, and maximum flow!  Works with AN lines with a simple unscrew of an adaptor.

3) Works with a completely stock set up or a monster build. You don’t have to buy another one.

4) Precision designed out of CNC 6061 aluminum, anodized, tested, and produced in the USA!

5) Available in several colors to compliment your engine bay

6) Largest bore currently on the market for better fuel flow

For more information, click here.

Agency Power has released their new Mitsubishi EVO X fuel rail. This fuel rail is a direct replacement for the factory unit. The fuel rail is CNC machined out of 6061 aluminum, then anodized in Agency Power Red, Silver, or Black. It fits with the stock fuel pressure regulator and fittings. The fuel rail can also be set up to work with larger AN lines and aftermarket kits as well, with a simple unscrew of a piece. You can’t go wrong with the Agency Power Evo X fuel rail.

Why is this Agency Power Fuel Rail better then stock? The AP fuel rail has the largest bore currently on the market which results in better fuel flow then stock. As well, the AP rail is designed to fit larger injectors, when upgrading to a larger turbo set up or needing to upgrade your fuel system, the AP rail will accommodate your needs. While keeping stock fitment and performance when additional fuel is not needed, the fuel rail is also a great dress up piece.

All Agency Power products come with a limited lifetime warranty.

First let’s cover the EVO VII VIII and IX bar:

The Mitsubishi Lancer Evolution is already a great handling and performing car. The AWD allows you to push the limits of the car on the street and track. Depending on your driving style, there are many improvements that can be made to the EVO to give you better handling characteristics. Agency Power wanted to take the suspension capabilities to the next level by developing this Rear Sway Bar kit for the 2003 and up Mitsubishi EVO VII, VIII, IX.

The AP bar replaces your factory 22mm bar with this 27mm 3 Way Adjustable Sway Bar. This bar will give you a wider range of adjustability. Most rear bars available are 23mm or 25mm. The Agency Power bar gives you a stiffer chassis, more control, and is the ultimate choice for serious road racers and street drivers wanting maximum handling capabilities. The larger sway bar will help increase more oversteer to help bring the rear end of the car around like a rear wheel drive vehicle.

In addition, Agency Power includes heavy duty sway bar mounts and bushings. The factory mounts are not able to be used with the thicker sway bar. These steel mounts give the car a firm and secure fit preventing any additional movement. All hardware and instructions are included with the sway bar kit. All Agency Power sway bars are available in white.

All Agency Power products come with a limted lifetime warranty!

Now, let’s cover the Mitsubishi Lancer Evolution X Sway Bar:

Agency Power wanted to take the suspension capabilities to the next level by developing this Rear Sway Bar kit for the 2008+ Mitsubishi EVO X.

The Agency Power bar replaces your factory 22mm bar with this 25mm 3 Way Adjustable Sway Bar. This bar will give you a wider range of adjustability. Most rear bars available are 23mm or 24mm. The Agency Power bar gives you a stiffer chassis, more control, and is the ultimate choice for serious road racers and street drivers wanting maximum handling capabilities. The larger sway bar will help increase more oversteer to help bring the rear end of the car around like a rear wheel drive vehicle. In addition, Agency Power includes heavy duty sway bar mounts and bushings. The factory mounts are not able to be used with the thicker sway bar. These steel mounts give the car a firm and secure fit preventing any additional movement. All hardware and instructions are included with the sway bar kit. All Agency Power sway bars are available in white.
All Agency Power products come with a limted lifetime warranty!

If you are going to an expo and want to show the Agency Power line email us at Sales@Agency-Power.com for more info.

Below are some of the first photos to surface of our NEW Sport Exhaust System installed on a 2007 Porsche 997TT.

The key to designing a high quality and fully functional system is in the balance between sound and performance. Turbo chargers perform best with virtually zero restriction off of the exhaust outlet, but that’s a recipe for noise that would be unbearable for a street prepared vehicle. Our job is to find the right combination of performance enhancing low restriction exhaust flow, while creating a “voice” that you enjoy hearing, all while preventing side effects such as the unpleasant drone at cruising speeds.

For more information on this system, including more photos, video, and dynamometer results, visit the product page here.