For more info on the Agency Power Porsche Cayman Exhaust Kit, click HERE.

From the NEW AP Carbon Division, comes the Carbon Fiber version of our wildly successful aluminum Y-Pipe Kit for the Porsche Panamera Turbo!  We wanted to step up the luxury look of the engine bay with a full carbon fiber version. This carbon fiber Y-Pipe is a full replacement and includes everything you need to install in place of the original.

The stock Y-Pipe is a 2 piece plastic Y design that is smooth on the inside with a “deflector” internally to channel air. The bad part about the stock one is it goes from a 78mm ID at the throttle body down to a approximately 51mm diameter Y split. This then connects to rubber boost hoses that expand under pressure. Both of these are a power robbers! If you retain the stock design and stock diameter hoses, YOU CANNOT GAIN power no matter if the YPipe is cast aluminum or plastic. This is why we made a complete Y-Pipe kit which retains a 3inch diameter design all the way to the factory end piece connections at the intercoolers.

The dyno sheet shows the car in standard mode with the stock Y piece versus our big Y-Pipe kit. These are huge gains throughout the ENTIRE rpm band which is impressive. Dyno proven results are not something to see, but something you can feel. The more airflow you get into that throttlebody the more HP you will gain. By eliminating the rubber boost hoses, you remove the pressure fluctuation from expansion which loses power. With our Y-Pipe kit, the air flow improvement improves every aspect of driving your Panamera Turbo. As tested on our Mustang AWD Dyno, the Y-Pipe made 34awhp and 35ft/lbs of torque.

These Y-Pipes are all made in the USA using carbon fiber braided sleeve and a bladder molding technique. The Y-Pipe includes necessary couplers and clamps for a true bolt on installation. All clamps should be torqued to no more then 15lbs. These are designed for the 2010 and up Porsche Panamera Turbo.

For Pricing and more information, visit here

Retail is only $1500!

Increase stall speed by 300-500rpm

Process is similar to porting and polishing a head.
Dissassemble unit, modify internals.

1 year limited warranty

For more information, contact your account rep.

Stay tuned(and subscribe!) to our Blog, Twitter, YouTube, and Facebook Fan Page for a full in depth Feature on AP Carbon soon!!

In the meantime, here is a sneak peek at the first AP Carbon part, the Carbon Fiber Porsche Panamera Y-Pipe!

PRODUCT DESCRIPTION FROM OUR ALUMINUM PORSCHE PANAMERA Y-PIPE :  “Looking at the stock Y design in front of the throttle body, we new there was improvements to be made. This throttle body is the same size as the Cayenne TT throttle body we use on our 996TT and 997TT upgrade kits. The stock Y-Pipe is a 2 piece plastic Y design that is smooth on the inside with a “deflector” internally to channel air. The bad part about the stock one is it goes from a 78mm ID at the throttle body down to a approximately 51mm diameter Y split. This then connects to rubber boost hoses that expand under pressure. Both of these are a power robber! If you retain the stock design and stock diameter hoses, YOU CANNOT GAIN power. This is why we made a complete Y-Pipe kit which retains a 3inch design all the way to the factory end piece connections at the intercoolers.

The dyno sheet shows the car in standard mode with the stock Y piece versus our big Y-Pipe kit. These are huge gains throughout the ENTIRE rpm band which is impressive. Dyno proven results are not something to see, but something you can feel. The more airflow you get into that throttlebody the more HP you will gain. By eliminating the rubber boost hoses, you remove the pressure fluctuation from expansion which loses power. With our Y-Pipe kit, the air flow improvement improves every aspect of driving your Panamera Turbo. As tested on our Mustang AWD Dyno, the Y-Pipe made 34awhp and 35ft/lbs of torque.”

Below is a short video showing the strength of the AP Carbon:

If you are going to an expo and want to show the Agency Power line email us at Sales@Agency-Power.com for more info.

If you are interested in this exhaust please email Ryan@Agency-Power.com  or call at (480)921-7422 x.247 to be contacted about details on future ship dates and pricing.