Motorex in Singapore sent us some pictures of the Agency Power Porsche 997.2 Carrera Carbon FiberIntake system that they installed on this white 2009 Carrera S.
As you can see in the pictures below the fully enclosed carbon fiber air box is designed to eliminate any hot engine heat that may get sucked into the air filters. The carbon fiber air box is designed to mate up with the lower aluminum tray as well. It creates a full seal which leave the K&N air filters exposed only to the ram air induction from the air ducts of the… Read More

FTC Automotive in Italy recently went to Motorsport Expotech in Modena, Italy and represented Agency Power Quite nicely! On had at the show they had Motor Mounts, BMW Exhausts, Sway Bar Links, Short Shifters, Intake, and Pulleys. Anything you need to build your car FTC had it on hand to show its potential customers! Thank you FTC Automotive for your support of our products. If you are in or around Italy please contact FTC Automotive for pricing and stock on Agency Power Products at www.FTCAutomotive.com .

If you are going to an expo and want to show… Read More

Agency Power just finished up our first Porsche 997.2 exhaust and will be putting it in production starting next week. Take a look at our first photo and the video that was shot on Vivid Racing’s dyno. The Agency Power 997.2TT exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit by putting down an extra 15awhp and 23ft/lbs of torque on the Mustang Dyno. The exhaust tested below is made with 200cell high flow cats with a single can muffler, allowing you to use your stock exhaust tips.

If you are interested in this exhaust please… Read More

Making more power is a never ending endeavor.  Agency Power has taken on the challenge to squeeze out every last bit of performance from the Porsche 997 Turbo. The newest product that is under development now is a valve controlled exhaust system that will allows the 997TT to bypass the muffler for a major performance boost. Of course, the valve system will also keep the car tame and muffled when driving around town with the push of a button.

The complexity of the design is enhanced when working in the confined space of the rear engine 997 Turbo. But be… Read More

Agency Power Porsche 997TT BRV Assembly

Step 1: Small and thinner O-Ring are used to seal the BRV to the turbo. Thicker O-Ring is used to seal the BRV together.

Step 2:Use silicone grease to lubricate the O-Rings and fit them into the grooves. Place the piston inside the valve body. Place the spring inside the piston and cap. The valve body and cap are sealed with “thick” O-Ring and held together with provided screws onto the turbo.

Step 3:Using the silicone grease, place the thinner and small O-Rings into the grooves of the valve body.… Read More

Looking for safety while boosting in your Porsche? Check out these roll cages that just came back from powdercoat! Flat black, gloss black, and special order guards red to match a customers interior! Agency power can custom powdercoat your rollcage to add that extra flair and safety to your ride! Email sales@agency-power.com or call (480)921-7422 for pricing and availability!

No, Agency Power hasn’t forgotten about all you Porsche owners! Agency Power currently makes the Valvetronic exhausts for the Nissan GT-R, BMW M5, and BMW M6 however; testing begins next week on the Porsche 996TT and 997TT Valvetronic Exhaust!!! Stay tuned for production pictures, dyno test, and price!

If you have questions or want to be put on a list of first available exhausts please email Sales@Agency-Power.com or call (480)921-7422

1.)    Place couplers onto Plenum as far in-board as possible. Insert left side (driver side) first. Rotate counter clockwise into position. Slide Couplers out into place and secure with clamps.

2.)    Install Vacuum lines to plenum. Install Throttle Body to plenum with provided bolts

3.)    Place couplers on y-pipe as far on as possible. Remove bolt from AC Line bracket on power steering pump (loose lines needed). Adjust AC Line slightly up.

4.)    Lay Y-Pipe into position. Place left side air intake box into MAF housing. Rotate air box clockwise. Lift right side of Y-Pipe. Push Right… Read More

MTR Motorsports in France is in the process of building a 996TT and recently took pictures of the Agency Power parts they added to the car not only for their good looks but for their performance as well! MTR Added Agency Power intercoolers, F-Hoses, and Red boost hoses to their 996TT, If your looking to build your Porsche with Agency Power parts in France give these guys a call! Agency Power keeps stock in all these parts so if you need help please feel free to call (480)921-7422 X247 for orders and stock checks.

Looking for an easy bolt on for you Porsche 996TT? One of our Agency Power customers picked up the Big Mouth race plenum and throttle body for a quick HP gain without braking the bank! We were sent a Dyno sheet to show the power gains from an outside source to show that the HP held at 12hp and peaked at 20hp! This was just with the BIG mouth kit. Still using stock intake filter and piping, stock intercoolers, and stock y-pipe.

The upgraded race plenum and throttle body increases the diameter of the intake pipe from… Read More