This car is getting outfitted with:

–AP Pitch Stop Mount

“Your Subaru WRX or STI is not complete without one of the all new Agency Power Billet Pitch Stop Mounts. These CNC machined 6061 aluminum pitch stop mounts replace your factory unit with a strong, stylish, and functional piece. The AP mount features a urethane bushing with a durometer of 88 to assist in reducing transmission movement. Improve your performance both on and off the track by increasing rigidity in your motor and transmission. The bushing fits perfect with the included stainless steel sleeve. Each Agency Power Pitch Stop Mount comes in a polished aluminum with the Agency Power logo laser engraved. It is designed to work with all Subaru WRX and STI from 2002 and up.”

–AP Titanium Tip Dual Exhaust

“Agency Power has developed one of the best sounding and performing exhaust systems for the 2011 STi Sedan. The new exhaust features an all T304 stainless steel piping in 3 inch diameter from the catback. The piping is all hand polished featuring robotic TIG welding. The midpipe includes a resonator to assist in keeping that traditional boxer engine sound with an exotic race tone that does not drone in the cabin. The ½ inch thick flanges offer a secure fit along with the factory placement exhaust hangers. The catback exhaust uses a high flow Y-Pipe to efficiently direct exhaust to the dual exhaust canisters. The Y-pipe features a merged collector and 2.5 inch piping on each extension to give your exhaust a combined 5 inches of exhaust flow. The straight through mufflers are designed to optimize horsepower with very little restriction. The mufflers do feature removable exhaust silencers for those wanting the ability to keep the system very quiet during daily use. The catback exhaust features dual 4 inch single straight exit Titanium Tips with the Agency Power logo. As tested on a Mustang all wheel drive dyno, the Agency Power catback exhaust made an impressive 17 all wheel horsepower and 28ft/lbs of torque.”

–AP Short Ram Intake

“Turbo cars need more air flow to make more power. Not only is air flow important, but how that air gets into your cars motor is an essential factor. With vehicle computers becoming more and more advanced, precision engineered products are necessary to optimize performance. Focused on quality, function, and style, Agency Power has developed this intake kit for the new 2008 and up Subaru WRX or STI. This intake kit is sold as a short ram. The kit features a CNC aluminum MAF sensor mount on our intake tube with built in mesh screen to keep air flow laminar. The intake kit includes a 5ply AP silicone coupler with clamps for easy install. To keep the cool air separated from the engine heat, Agency Power has developed this heat shield which mounts to factory chassis locations from the front crash beam to the fender. The high flow K&N cone air filter securely clamps in place to the short ram or cold air extension tube. The heat shields are powder coated in a textured black finish and the intake tubes are done in wrinkle red to match the STI intake manifolds. Tested on a Mustang all wheel drive dyno, the Agency Power intake kit gained approximately 10 horsepower and ft/lbs of torque. At the peak horsepower point of 5000 rpm’s, the intake kit made almost 20 wheel horsepower.”

–AP Short Throw Shifter

“Agency Power’s Subaru STI 6 Speed Short Shifter is for the 2004 and up models. This short shifter is a direct replacement for the factory shifter. The shifter is 1018 Steel and has a Black oxide finsh. The shifter retains all the factory parts for easy install and functionality. The height is about 2 inches shorter then stock and the throw is about 30% less then stock. Short Shifters are designed to reduce the throw between gears, which enables you to have smoother and faster shifts. With the solid steel weight, the shifts slam into gear quick and responsively to help reduce shift delay. The lower height gives the shifter a better feel as well. Works with the stock shift knob, shift boot, and reverse lock out mechanism.”

–AP Down Pipe

“The Agency Power Racing Downpipe fits all Subaru WRX or STI cars from 2008 and up. The downpipe is full stainless steel with a bell mouth upper section. The .4″ thick flanges ensure a tight and strong seal. The downpipe deletes both your catalytic converters and bolts to all factory style turbos. The precision welds and mirror polishing give the Agency Power Racing Downpipe a show finish. Each downpipe includes a bung for an aftermarket air/fuel sensor as well as a bung for the factory O2 sensor. When adding an Agency Power Racing Downpipe to your Subaru WRX or STI, you will gain more horsepower and overall performance. The downpipe allows for better flow of the turbine and wastegate gas. The downpipe has a large bell mouth which allows both to flow smoothly out and down the pipe. The 3 inch diameter piping is the perfect size for the turbo cars from stock hp to 500 whp. The bellmouth will also allow for a little boost increase since there is less restriction. Mate this downpipe up with your aftermarket catback exhaust or one of our Agency Power catbacks for an amazing sound and almost 25 wheel horsepower gain.”

IN STOCK READY TO SHIP!

“Agency Power has developed one of the best sounding and performing exhaust systems for the 2008 and up Subaru WRX Sedan. The new exhaust features an all T304 stainless steel piping in 3 inch diameter from the catback. The piping is all hand polished featuring robotic TIG welding. The midpipe includes a resonator to assist in keeping that traditional boxer engine sound with an exotic race tone that does not drone in the cabin. The ½ inch thick flanges offer a secure fit along with the factory placement exhaust hangers. The catback exhaust uses a high flow 3″ Y-Pipe to efficiently direct exhaust to the dual exhaust canisters. The Y-pipe features a merged collector and 2.5 inch piping on each extension to give your exhaust a combined 5 inches of exhaust flow. The straight through mufflers are designed to optimize horsepower with very little restriction. The mufflers do feature removable exhaust silencers for those wanting the ability to keep the system very quiet during daily use. The catback exhaust features dual 4 inch single straight exit Titanium Tips with the Agency Power logo.

As tested on a Mustang all wheel drive dyno, the Agency Power catback exhaust made an impressive 17 all wheel horsepower and 28ft/lbs of torque. The exhausts are available for all 2008 and up Subaru WRX Sedans and Non-Turbo Impreza Sedans.

2008+ Subaru WRX Wagon Exhaust:

“Agency Power has developed one of the best sounding and performing exhaust systems for the 2008 and up Subaru WRX Wagon. The exhaust features an all T304 stainless steel piping in 3inch diameter from the catback. The piping is all hand polished featuring robotic TIG welding. The midpipe includes a resonator to assist in keeping that traditional boxer engine sound with an exotic race tone that does not drone in the cabin. The ½ inch thick flanges offer a secure fit along with the factory placement exhaust hangers. The straight through muffler is designed to optimize horsepower with very little restriction. The catback exhaust features a 4 inch single straight exit Titanium Tip with the Agency Power logo.

As tested on a Mustang all wheel drive dyno, the Agency Power catback exhaust made an impressive 17 all wheel horsepower and 28ft/lbs of torque. The exhausts are available for all 2008 and up Subaru WRX Wagons.”

Agency Power has developed one of the best sounding and performing exhaust systems for the 2011 WRX STi Sedan. The new exhaust features an all T304 stainless steel piping in 3inch diameter from the catback. The piping is all hand polished featuring robotic TIG welding. The midpipe includes a resonator to assist in keeping that traditional boxer engine sound, with an exotic race tone that does not drone in the cabin. The ½ inch thick flanges offer a secure fit along with the factory placement exhaust hangers. The catback exhaust uses a high flow Y-Pipe to efficiently direct exhaust to the dual polished mufflers. The Y-pipe features a merged collector and 2.5 inch piping on each extension to give your exhaust a combined 5 inches of exhaust flow.

The subject vehicle is a 2005 Subaru WRX. Agency Power makes quite a few Subaru parts, check them out here!

Enjoy:

• Agency Power GT30R Rotated Turbo Kit(includes downpipe with open dump pipe, Short Ram Intake)
• AP Front Mount Intercooler Kit
• AP Turbo Back Exhaust
• AP Blow Off Valve
• AP Fuel Rail
• AP Fuel Distribution Block
• AP Fuel Lines
• AP Alternator Cover
• AP Silicone Hoses
• AP Intercooler Piping
• AP Springs
• AP Rear Sway Bar

The car is still being tuned on the dyno but so far it has made 460 horsepower at the wheels on a Mustang 4 Wheel Dyno on 91 pump gas.  This was at a conservative 15-16 psi boost.  The torque was 400 lb/ft.!

(CLICK ON ANY OF THE ABOVE PRODUCTS TO SEE MORE INFORMATION)

(VIDEO OF DYNO TUNING RUNS AT BOTTOM OF POST, DON’T MISS IT!)

Now for some quick photos of the build:

1)  HERE’S A COUPLE SHOTS OF THE PROJECT 2008 SUBARU WRX SEDAN WITH THE AGENCY POWER KIT INSTALLED

2) HERE’S THE TINY FACTORY TURBO, INTERCOOLER, AND CHARGE PIPE

3) CLOSEUP OF ROTATED TURBO AND PIPING

4) GT30R TURBO

5) AP Fuel Rail

6) AP Fuel Line Closeup

7) AP Lightened Flywheel

AP Alternator Cover

9) AP Front Mount Intercooler Installed

10) AP Fuel Distribution Block

11) AP Manual Boost Controller

12) AP Turbo Back Exhaust

13) AP Downpipe with Dump Pipe

14) A look from the bottom of the car

YOUTUBE VIDEOS OF THE DYNO TUNING:

If you are going to an expo and want to show the Agency Power line email us at Sales@Agency-Power.com for more info.

Subaru Superstore of Chandler
1050 S. Gilbert Rd
Chandler, AZ 85286
Phone – (480)222-6000

Come stop in on Saturday February 20th, 2010 from 10am-4pm to see the ESX Motorsports Team that will be showcasing their WRX drag car! While your there stop by and see the Agency Power products that are on display.