Agency Power Porsche 997TT BRV Assembly
Posted by Cole Kelly in Technical Support
Agency Power Porsche 997TT BRV Assembly
Step 1: Small and thinner O-Ring are used to seal the BRV to the turbo. Thicker O-Ring is used to seal the BRV together.
Step 2:Use silicone grease to lubricate the O-Rings and fit them into the grooves. Place the piston inside the valve body. Place the spring inside the piston and cap. The valve body and cap are sealed with “thick” O-Ring and held together with provided screws onto the turbo.
Step 3:Using the silicone grease, place the thinner and small O-Rings into the grooves of the valve body. These O-rings seal the BRV onto the turbo.
Step 4:Screw the assembled BRV onto the turbo. The spring should provide tension to the assembly.
