This Install Guide is intended to help with the installation of the Agency Power Weighted Shift Knob for 2010-2019 VW GTi and 2015-2019 Golf R.
To remove the shifter boot. Push the 2 locking tabs forward and pull up on bezel.
Using a small screw driver place in the loop of the strap and loosen strap by moving sideways until able to remove shift knob.
Using the bottom edge of the knob as a guide cut the factory boot off.
Place shift knob into boot.
Align shifter on shaft and tighten the 4 set screws with allen wrench.
Secure the boot with the zip ties and reinstall shifter boot.
Installation is Complete.