The Agency Power Front Mount Air Intake System for the BMW M3 | M4 F80/F82/F83 vehicle is a great way to improve performance of the turbocharged S55 Engine. The challenge with building this intake is to exceed the performance of the factory air box. Turbocharged vehicles can be easily tuned and with this increase in performance, the engine demands for air flow improvements.
The cold air intake kit retains the factory intake snorkel to deliver air flow direct to the twin cone air filters. ?The cone filters feature a high flow filtration design to stop more bad particles than the stock paper filter while keeping an extremely high efficiency. ?The filters feature front inlets along with its full cylindrical surface area to bring in more airflow than stock. ?The filters feature rubber end caps with the AP logo and Agency Power text.
The Agency Power Short Ram Intake kit features 3 inch aluminum piping that has a CNC machined mass air flow sensor mount from 6061 aircraft grade aluminum. Designed on CAD to ensure a proper OEM fit, the intakes fit in place of the factory unit from the throttle body forward. Each intake features a high flow K&N cone filter with front induction which is key on the GT-R’s stock intake system. These intake retain the factory inlets on the front bumper to help draw in a large amount of cool air.
Agency Power has engineered and tested to release this short ram intake system for the all new 2008 and up Mitsubishi EVO X. The short ram intake features an aluminum intake pipe with a CNC machined aluminum MAF sensor adapter. The factory MAF sensor fits securely into place with provided hardware. To keep cool air directed to the intake system, AP has retained the factory air inlet scoop similar to the OEM air box. The air scoop snaps into place on our aluminum heat shield like factory. there is no cutting or altering your OEM components.
The silicone intake hose by Agency Power is all smooth inside. Its mandrel design allows for small flex while the 1 piece part gives a less restrictive bend. ?No ridges or sharp bends means faster, smoother air flow. ?The second issue is the intake noise box. ?This is great to hear your engine in the stock form, but that small split in the factory intake hose does not allow for a perfect, smooth air flow.
Dubbed “The Stealth” system, the Agency Power cold air intake adds power to your Cayenne S or GTS from 04-07. ?The intake kit is designed to replace the entire factory airbox from the MAF tubes to the filter. ?Each intake tube is hand made HERE in the USA using precision jigs with 6061 aluminum that is TIG welded. ?The intake tubes attach to the factory MAF sensor with the supplied silicone coupler. ?Each intake tube features a custom spec;d K&N cone filter with front inlet to draw air in from the OEM ducting.
This intake kit is sold as a short ram. The kit features a CNC aluminum MAF sensor mount on our intake tube with built in mesh screen to keep air flow laminar. The intake kit includes a 5ply AP silicone coupler with clamps for easy install. To keep the cool air separated from the engine heat, Agency Power has developed this heat shield which mounts to factory chassis locations from the front crash beam to the fender. The blue dry media cone air filter securely clamps in place to the short ram or cold air extension tube. The heat shields are powder coated in a textured black finish and the intake tubes are done in wrinkle red to match the STI intake manifolds.
The more airflow a vehicles engine receives, the more power you will be able to generate. The all-new Agency Power Short Ram Intake Kit for your Mitsubishi EVO VIII, MR, and RS is the perfect solution to increasing airflow allowing for more performance from your EVO.
Convert your Agency Power short ram intake kit into a cold air with this extension pipe. The extension pipe is powder coated wrinkle red to match the short ram intake tube and STI OEM intake manifold. It includes an additional coupler and clamps which you will need when installing the pipe.
Agency Power developed this cold air intake kit to give more roar to the 4.8L V8 engine. It’s twin tube, dual filter design comes into the Y pipe before the intake manifold. Constructed out of 6061 aluminum, each pipe is TIG welded for a beautiful finish. The pipes are then powdercoated to either brighten up your engine bay or keep it OEM. Each pipe sits the custom Agency Power air filter by aFe in the fender well to really get cool air flow. With brackets attached for sturday mounting, this kit is really the best bolt-on you can do to the Porsche Panamera V8.
This intake kit is sold as a cold air setup. The kit features a CNC aluminum MAF sensor mount on our intake tube with built in mesh screen to keep air flow laminar. The intake kit includes a 5ply AP silicone coupler with clamps for easy install. To keep the cool air separated from the engine heat, Agency Power has developed this heat shield which mounts to factory chassis locations from the front crash beam to the fender. The blue dry media cone air filter securely clamps in place to the short ram or cold air extension tube. The heat shields are powder coated in a textured black finish and the intake tubes are done in wrinkle red to match the STI intake manifolds.
Agency Power has developed a check engine light free intake that is able to add performance to the Porsche Boxster. The all aluminum intake tube retains the factory diameter including our CNC machined 6061 aluminum MAF housing. Fitting up to the stock intake hose with no hassles, the filter then is secured behind our heat shield. The heat shield is built to separate the filter and the motor to keep the incoming air flow from the side intake duct a true Cold Air experience.